P-A0、P-B0小轧车

概述:

如今客户对产品质量要求日之趋高，除了要求对色准，外观平整外，尤其在手感方面要求越来越高。往往因手感达不到要求而重做的，从而导致时间和精力的严重浪费。我司的小轧车刚好可以很好的解决这个问题，可利于贵司模拟现场条件制做高度再现性的正确手感样布争取更好的商机。

General:

Nowadays , customers ask for more requirements about product quality :not only the requirement of color and smooth surfaces, but also comfortable feel. Some work should be redone because of bad touching, which in turn , results in serious waste of time and energy. The small padder manufactured by our company is an ideal solution to this problem . Excellent and comfortable touching can be reached with the on spot simulating in your company so as to create more and better business opportunities for you 。

用途：

可调整到与现场一致的压吸率。

可利用此机，选择整理助剂浓度的品质好坏．适用于染整厂、助剂、颜料制造厂。

Application:

Adjustable to pressed absorbing rate on spot and provide precise pressed dyeing or resin prescription.

Select the concentration quality of auxiliary ,which is applicable for dyeing and finishing plant , manufacturer of auxiliary and dye .

特点：

1.以压缩空气推动气缸．使压力均衡，且经久使用后，压力的再现性良好。

2.罗拉目前的使用硬度72度，压吸率在45%～90%之间适用布范围广，应用广泛。

3.小轧车要业安全性能佳，马达转动加装正反转功能，转动控制可用手动或脚动来互换控制，对操作者安全．特殊装置效率高又安全不会夹到手指。除主架外，其他是不锈钢制成。

Feature:

1.To promote the membrane by compressing the air; make the pressure balanced .The pressure reappearance is still in good working order after long time using.

2.The hardness of roller is 72 degree and pressure-absorbing rate is from 45% to 90%.

With better safety and reciprocal rotating of motor ,the small padder can be operated either by hａnd or foot ,which makes the operator much safer . 3.The special device with high efficiency is designed for safe operation and used to prevent the finger to be clamped. All the other parts are made of stainless steel except the framework .

规格：

1.压吸罗拉采用进口材料，外部被覆N，B，R，橡胶再加以精密研磨完成，硬度为邵氏72度。

2.橡胶罗拉直径为130mm，长度为430mm。

3.采用3相370V电机转动，转速可调节。

4.左右压力可独立调整，压力范围0～7kg

5.二组压力指示计

6.二组压力调节阀

7.空压机为选购设备

8.外形尺寸（L*W*H)：P-A0：920*650*1250

P-B0：870*650*1100

Specification：

1.Pressure absorbing roller with 72 degree of hardness , is made of imported materials and covered by N,B,R, and rubber ; then be abraded.

2.The diameter of rubber roller is 130mm and the length is 430mm.

3.The phase 370Vmotor rotation,speed adjustable.

4.Right and left pressure or independent adjustment with the pressure range between 0~7kg.

5.Group two pressure indicating meter

6.Group two pressure adjustment valve

7.Air compressor is an optional equipment

8.Pimensions（L*W*H)：P-A0：920*650*1250

P-B0：870*650*1100

所列规格如有变动，本公司拥有随时更改权，恕不另行通知。

If the listed specification has any changes,our company has right to modify without notification at any time.